model. no. rev. ningbo foryard optoelectronics co.,ltd add: no.115 qixin road ningbo zhejiang china zip: 315051 tel: 008657487933652 87927870 87922206 fax: 008657487927917 e-mail: sales@foryard.com ( general) http://www.foryard.com page 1/7 indicators automotive application decorative lighting prepared by illuminations model no. FYLF-1110PG1C customer approved signatures flux led type size (mm):3.5*7.62*7.62 checked by fylf1110pg1c a features: product specification rohs compliant emitting color:pure green lens type:water clear http://www.foryard.com pb-free reflow soldering application approved by applications:
model. no. rev. mechanical dimensions notes: 1. dimension in millimeter [inch], tolerance is 0. 25 [.010] and angle is 1 unless otherwise noted. 2. bending length*1%. 3.the specifications,characteristics and technical data described in the datasheet are subject to chan ge without prior notice. page 2/7 http://www.foryard.com fylf1110pg1c a model no. FYLF-1110PG1C r
model. no. rev. min. typ. 2.80 515 3.5 1000 120 page 3/7 1.luminous intensity is based on the for yard standards. http://www.foryard.com material copper gold epoxy note: 2.pay attention about static for ingan deg ingan material item reflector wire encapsulate chip u a nm lm mcd if = 20ma if = 20ma if = 20ma 530 symbol vf condition if = 20ma vr = 5v if = 20ma tstg 40oc+100oc vr forward voltage 3.60 5 50% power angle 2? reverse current dominant wavelength luminous flux d iv v luminous intensity ma ma items max v unit if 100 reverse voltage reflow soldering:260 /3sec typical electrical &optical charcteristics(ta=25oc ) mw 120 40 o c+85 o c soldering temperature tsol 5 power dissipation operation temperature topr forward current(dc) pd 30 symbol ifp items a ir peak forward current* *pulse width Q QQ Q 1msec duty Q QQ Q 1/10 storage temperature v fylf1110pg1c model no. FYLF-1110PG1C unit absolute maximun ratings(ta=25 o oo o c) absolute maximum rating
model. no. rev. typical eletrical/optical characteristics curves(t a=25 o oo o c unless otherwise noted) radiation pattern. page 4/7 model no. FYLF-1110PG1C fylf1110pg1c a http://www.foryard.com i n g a n / a l 2 o 3 r elative lumionous intensity(lop @max=1)
model. no. rev. packing diagram note: the specifications are subject to change with out notice. please contact us for updated informati on. page 5/7 model no. FYLF-1110PG1C a http://www.foryard.com fylf1110pg1c foryard www.foryard.com foryard led led led led pn:fylf-xxxxxxxx-xx qty: 33600 pcs date:xxxx/xx/xx gw: xx kg nw: xx kg xxxxxxxxxx rohs rohsrohs rohs attention attention attention attention part no : fylf-xxxxxxx q'ty: 60 pcs vf:x iv:xxx wl:xxx 60pcs/ic tube 600pcs/10pcs ic tube 8400pcs/140pcs ic tube 33600pcs/560pcs ic tube out side label qc: qc pass
model. no. rev. precautions for use: 1. storage any mechanical force or any excess vibration shall not be accepted to apply during cooling process to normal temperature after soldering. avoid quick cooling. lead frames are silver plated copper alloy. the sil ver plate surface may be affected by environments which contains corrosive substan ces. please avoid conditions which may cause the le ds to corrode,tarnish or discolour. 2. soldering recommended soldering profile: page 6/7 not less than 3mm from the base of the epoxy solder=sn 63pb 37 solder= pbfree peak preheat temperature:100110 peak preheat temperature:100110 model no. FYLF-1110PG1C http://www.foryard.com 280 max(63/37 solder) 300 max(pb free solder) 3 seconds max. position not less than 3mm from the base of the epoxy preheat time solder temperature a fylf1110pg1c soldering time temperature 110 max total preheat time:5060seconds total preheat time:5 060seconds peak profile fit temperature:235 (max 245 ) manual soldering solder dipping soldering iron 35w max. preheat peak profile fit temperature:260 max dwell time above 200 should not exceed 3 seconds dwell time above 200 should not exceed 3 seconds dipping time 60 seconds max. 63/37 solder:235 (245 max) pbfree solder:255 (260 max) 3 seconds max. position times(sec) 50 100 150 200 250 300 0 0 10 20 30 40 50 60 70 80 90 100 110 120 temperature( ) preheat laminar wave
model. no. rev. caution: the leds must not be repositioned after soldering. do not apply any stress to the lead particularly wh en heat. 3. static electricity static electricity and surge voltage damage the led s. so it is recommended that an esd wrist band, esd shoe strap or an anti-electrostatic glove be used when handling the leds. all devices, equipment and machinery must be proper ly grounded. 4. others reverse voltage should not exceed the absolute maxi mum rating on the data sheet. the led leads may become tarnished if they contact hydrogen sulphide or other gaseous chemicals. the colour of the leds is changed slightly an opera ting current and thermal. this device should not be used in any type of fluid such as water, oil, organic solvent and etc. when washing is required, ipa (isopropyl alcohol) s hould be used. the influence of ultrasonic cleaning on the leds de pends on factors such as ultrasonic power and the w ay. gallium arsenide is used in some of the products li sted in this publication. these products are danger ous if they are burned or smashed in the process of disposal, it is also dangerous to drink the liq uid or inhale the gas generated by such products when chemically disposed. high-brightness led light may injure human eyes. av oid looking directly into lighted led. the appearance and specifications of the product ma y be modified for improvement without notice. page 7/7 fylf1110pg1c a http://www.foryard.com model no. FYLF-1110PG1C
|
